mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 14427 > < Access Cover, Engine|Service and Repair|Page 14421
Page 1
background image

Front Bumper: Procedures

AZ88.00-P-0001-02TX Convert Front Bumper

1. Mark left inner section (2) and right inner section (3) at the points marked in illustration and cut.

Lower section on inside is an eliminated part

Component Identification

Shown on left inner section (2)

2. Insert left inner section (2) and right inner section (3) into exterior surface of AMG front apron (1).

For this purpose, slide inner section onto lugs in area of wheelhouse and arrest in area of engine hood connection (arrows)

3. Fasten left inner section (2) and right inner section (3) with 5 C-clamps (7) (left bottom magnified section) each and one securing clamp (8) each.
4. Fasten front fog lamp bracket (4) on left and right to exterior surface of AMG front apron (1) with 9 C-clamps (5) each.

Front fog lamp bracket (4) is different for left and right side.

Procedures|Page 14427 > < Access Cover, Engine|Service and Repair|Page 14421