CLS 55 AMG (219.376) V8-5.5L SC (113.990) (2006)
Component Identification
1
Before removing the centering sleeve, measure and note dimension (a).
The specified insertion dimension for installation may deviate depending on the thickness of the flexible couplings.
2
Knock centering sleeve out of propeller shaft using a flat chisel (arrow).
Component Identification
3
15 mm from the end face of the centering sleeve (10) drill a hole (10 mm dia.) at right angles through the centering sleeve (10).
Only if the centering sleeve (10) cannot be knocked out with a flat chisel.
Component Identification