E 300 (124.131) L6-3.0L DSL (606.910) (1995)
/l6-3.0l_dsl_(606.910)/Page-352001.png)
Compression Check: Testing and Inspection
Crank Engine With Starter
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
1. Switch off ignition
-
Key in ignition/starter (8) in position O.
2. Connect compression pressure recorder as follows:
a. Open cover (1) of cable connector (X12/3) at left wheel house.
b. Connect clamp of compression pressure recorder (A) to the connector (X12/3).
c. Unplug engine compartment/engine connector (X22/2) terminal 50 in right of component compartments.
d. Models built up to about 3, 1997, connect adapter cable (01) with connector (X22/2)
e. On all models, unplug coupling.
