E 300 (124.131) L6-3.0L DSL (606.910) (1995)
/l6-3.0l_dsl_(606.910)/Page-751001.png)
Variable Induction Control Actuator: Service and Repair
Remove/Install Intake Line Resonance Flap
Removing and Installing intake line resonance flap
Preceding work: Removing and installing resonance intake line. Refer to Service and Repair - Procedures See: Service and Repair
Engine 606.910
Screw Bolts (99/11) in.
Remove intake line resonance flap (99/2). Pay attention to installation position. Examine 0-ring, replace if necessary.
Attention:
Resonance flap must not be operated by hand. For testing, pressurize vacuum unit with vacuum.
