mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
Control Pressure Cable <--> [Throttle Valve Cable/Linkage, A/T]|Adjustments|Page 3217 > < A/T - No 2-3 Upshift at Full Throttle/Engine Cutout

E 300 (124.131) L6-3.0L DSL (606.910) (1995)

Page 1
background image

Control Pressure Cable: Adjustments

ADJUSTMENT FOR CONTROL PRESSURE CABLE

Note:  Only the basic adjustment facilities are shown. The peripheral parts of the individual engine variants can differ.

Condition for adjustment:  Throttle control must be adjusted accurately.

(a)  Engines With Ball Head Version

Detach control pressure cable. Push back ball socket (19) (direction of arrow), then pull forward again until a slight resistance is felt. It should now
be possible to press the ball socket (19) onto the ball head free of tension; re-position adjusting screw (15), if necessary.

(b) Engines With Pointer Version

Detach control pressure cable. Screw in adjusting screw (15) of control pressure cable (98) until the tips of the pointers (arrow) are facing each
other.

Control Pressure Cable <--> [Throttle Valve Cable/Linkage, A/T]|Adjustments|Page 3217 > < A/T - No 2-3 Upshift at Full Throttle/Engine Cutout