E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Sunroof / Moonroof Windguard: Service and Repair
AR77.21-P-0110T Remove/Install Panoramic Roof Wind Deflector Coupling Arm
AR77.21-P-0110T Remove/Install Panoramic Roof Wind Deflector Coupling Arm
- with CODE (413) Panoramic sliding roof
- with CODE (419) Solar module for panoramic roof
Illustrated On Left Side Of Vehicle
DANGER:
-
Risk of injury to fingers being jammed or squeezed when removing and Installing or aligning hoods, doors, trunk lid/tailgate or
sliding roof.
-
When moving components, ensure that no body parts or limbs are within the operating range of moving parts.
1
Open panoramic roof
2
Cover guide rail in the area of the coupling arm (1) with a clean cloth
3
Pull out retainer (5) and press out bolt (6)
NOTE: Note correct installation position.
4
Unscrew screw (3).
5
Push coupling arm (1) toward front out of the shackle (4) underneath and remove
6
Insert coupling arm (1) from the front into the shackle (4)
7
Screw in bolt (3)
NOTE: Do not yet tighten.
8
Insert bolt (6) and push fuse (5) into the groove at the bolt (6)
NOTE: Installation: position must be noted. The bolt (6) in the bearing (7) must not have a noticeable play, replace bearing (7), bolt (6) and
retainer (5) if necessary.
9
Open and close wind deflector (2) several times by hand
10
Tighten bolt (3)
11
Close panoramic roof