E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Component Identification
1
Measure comparative measurement (V1) from the check point (K) to the bolted connection of the suspension strut on the lower transverse control
arm. Measure on the left and right side in each case.
In order to assess the effects of accident damage, the bearings on the torque strut and spring control arm must be undamaged. Because of the
inaccuracies resulting from the tolerances of the bearings, the comparative measure (V1) is only usable to a certain extent.
Component Identification
2
Measure comparison dimension (V2) from the check point (K) to the longitudinal member of the body, left to right.
This measurement is a reference dimension for the body.