E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Comfort program "C":
^
Starting off always in 2nd gear (except in 1st gear range).
^
The maximum speed is not utilized in any one gear.
When kickdown is operated the upshifts and downshifts take place as in the sport program "S".
GF27.19-P-5137-04NT Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04NT Steering wheel gear shifter, function
- TRANSMISSION 722.9
- 211, 219 up to 31.5.06
- with code (428) Steering wheel shift buttons
The status of the left steering wheel gear shifter (S110/2) and right steering wheel gear shifter (S111/2) is read by the steering column module (N80)
via Local Interconnect Network (LIN). The steering column module (N80) places the signal "Upshift" or "Downshift" on the Controller Area Network
bus class C (engine compartment) (CAN-C).
The fully integrated transmission control (VGS) control unit (Y3/8n4) receives the request and initiates the gear change.
Gear changes which could result in impermissibly high or low engine speeds are not performed.
GF27.19-P-5137-04PMA Steering Wheel Gear Shifter, Function
GF27.19-P-5137-04PMA Steering wheel gear shifter, function
- TRANSMISSION 722.6
- 209, 211 up to 31.5.06
- with code (428) Steering wheel shift buttons
The status of the left steering wheel gear shifter (S110/2) and right steering wheel gear shifter (S111/2) is read by the steering column module (N80)
via Local Interconnect Network (LIN). The steering column module (N80) places the signal "Upshift" or "Downshift" on the Controller Area Network
bus class C (engine compartment) (CAN-C).
The ETC [EGS] control unit (N15/3) receives the request and initiates the gear change.
Gear changes which could result in impermissibly high or low engine speeds are not performed.
GF27.19-P-5137NT Steering Wheel Gear Shifter, Location/Task/Function
GF27.19-P-5137NT Steering wheel gear shifter, location/task/function
- TRANSMISSION 722.9
- 211
- 219 up to 31.5.06
- with CODE (428) Steering wheel shift buttons
Component Identification