E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
/v6-3.2l_(112.954)/Page-2418011.png)
Component Identification
1
Using a suitable screwdriver press radial sealing ring (42) out of the rear axle housing.
AR35.31-P-0540-05T Pressing Off, Pressing In Radial Seal at Side of Rear Axle Housing
AR35.31-P-0540-05T Pressing off, pressing in radial seal at side of rear axle housing
Special Tools
Component Identification
Pushing off
Rear axle center assembly without side bearing cover.
1
Using a suitable screwdriver press radial sealing ring (32a) out of the rear axle housing.
Shown on rear axle differential dia. 198 mm
