E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
Component Identification
Replace self-locking nuts.
1
Attach propeller shaft to transmission flange.
AR41.10-P-0070-01A Remove/Install Boot on Propeller Shaft of Front Axle Gear
AR41.10-P-0070-01A Remove/install boot on propeller shaft of front axle gear
Long-life grease (NLGI grade 2)
Remove
Component Identification
1
Detach universal joint (72) from propeller shaft (70).
2
Remove rubber sleeve (71).
Install
3
Coat splined profile with Molykote grease (long-life grease).
4
Push rubber sleeve (71) onto propeller shaft (70) with universal joint (72).
Pay attention to markings (arrows) for installation position.
5
Check rubber sleeve (71) is correctly seated.
AR41.10-P-0200T Replace Centering Sleeve
AR41.10-P-0200T Replace centering sleeve