E 320 4MATIC Sedan (211.082) V6-3.2L (112.954) (2004)
/v6-3.2l_(112.954)/Page-2421002.png)
Component Identification
3
Position the extraction and insertion tool 01) on the rear axle shaft flange (2), in the process screwing the spindle (03) onto the insertion tool (04).
4
Mount the extraction and insertion tool (01) on the rear axle shaft flange (2) using three wheel bolts.
5
Draw in the rear axle shaft flange (2) up to the stop in the angular contact ball bearing (3); to do this, turn the nut (02) and counterhold the spindle
(03).
