E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Keyless Entry Receiver: Service and Repair
Removing And Installing Front Door IR Receiver
Illustrated On Model 208
1
Pull rubber door seal (1) out in area of door lock
2
Unscrew mounting screw for IR receiver with Alien wrench (2, 4 mm)
3
Carefully remove left front door IR receiver (A26/1) or right front door IR receiver (A26/2),
4
Disconnect electrical connector
CAUTION: When installing ensure that wires are routed correctly and electrical connector is properly clipped in.
5
Reinstall in opposite order