E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
^
Location of wear sensors for:
Lucas floating caliper: on outer brake pad.
Teves floating caliper: on inner brake pad
^
One wear sensor is installed on model 202 and taxi version as of 09.95.
-
Tighten brake pipe (5) on brake hose (51) to:
Except model 210 14 Nm
Model 210: 18 Nm
-
Tighten brake hose (51) on floating caliper (31a) to: 18 Nm
-
Refer to Replacement, for notes on installing brake hoses. See: Hydraulic System/Brake Hose/Line/Service and Repair
NOTE:
^
Brake hose connection on brake pipe modified.
^
The versions are not interchangeable.
-
Refer to notes on installing brake pad wear indicator contact sensors. See: Brake Pad/Brake Pad Wear Sensor/Service and Repair
7. Bleed brake system. See: Brake Bleeding/Service and Repair
8. Check brake system for leaks, refer to Using Pedal Pressure. See: Hydraulic System/Testing and Inspection
Without AMG Engineering Package
NOTE: For model name/model number cross reference refer to Model Designation Table. See: Application and ID
NOTE: Brake hose connection on brake pipe modified. See: Hydraulic System/Brake Hose/Line/Description and Operation
DANGER
^
Risk of poisoning due to consuming brake fluid.
^
Risk of injury due to brake fluid coming into contact with the skin or eyes.
^
Only pour brake fluid into suitable, appropriately marked containers.
^
Wear protective clothing and safety glasses when handling brake fluid.
Removal
NOTE:
^
Refer to Notes On Brake Fluid. See: Service Precautions/Vehicle Damage Warnings
^
Refer to Notes on Test and Repair Work to brake system. See: Service Precautions/Vehicle Damage Warnings