E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
-
Ensure that the rear of the engine does not touch the body
-
Do not over-tension coolant hoses
-
Do not damage drive shafts and cup seals
13
Unscrew bolts (7) of engine mounts (5) at front axle carrier
14
Remove engine mounts (5)
NOTE: Environmental protection regulations for disposal of engine mounts
CAUTION: Installation: The anti-twist locks (arrows) at the engine mounts (5) must be located in the retaining slots (arrows) of the
engine supports.
Dispose engine mounts into mixed scrap.
15
Install in the reverse order
16
Read diagnostic trouble code memory and erase
-
Stored faults which can result from cables being disconnected or from simulation during removal and installation or test work, have to be
processed and erased in the fault memories after completing the work.