E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Outside Temperature Display Sensor: Service and Repair
Removing And Installing Outside Temperature Indicator Sensor
Illustrated On Model 170
NOTE: The location of the temperature sensor for the outdoor temperature indicator on model 202, 208 and model 210 is slightly below the location
in model 170.
1
Disconnect ground lead from battery
CAUTION: On model 210 insulate cable terminal on ground lead to prevent accidental contact between disconnected ground lead and
ground point W10.
2
Remove engine compartment paneling
3
Open installation flap for left fog lamp (E5/1)
4
Disconnect electrical connector for outside temperature indicator temperature sensor (B14)
5
Unclip outside temperature indicator temperature sensor (B14) below front bumper
6
Reinstall in opposite order