E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Trunk / Liftgate Hinge: All Technical Service Bulletins
Body - Liftgate Hinge Recess Corrosion
Date: March 6, 2009
Order No.: P-B-88.50/80
Group: 88
SUBJECT:
MY-All, Model 210.282/265
Rear Hinge Recess Corrosion
If you receive customer reports in the above model vehicles regarding rear hinge recess corrosion, do the following:
1. Blow out hinge recesses using compressed air and clean with silicone remover.
2. Remove rust from affected points and prime with EP priming filler.
3. Seal folding area using MB body sealant. Refer to EPC-net for parts information.
4. Apply paint with a brush.
5. Apply MB cavity preservation wax.
Parts Information