E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Examining
1
Examine ease of movement and condition of relay lever (31/1) and accelerator control cable (32)
-
Replace parts, as necessary
Adjusting
2
CTP
-
The relay lever (31/1) must be resting against CTP stop (a)
NOTE: Hand-held tester should indicate 0 %.
3
Turn adjusting bolt (32/3) until relay lever (31/1) is resting against CTP stop (a)
4
WOT
-
Depress accelerator until the relay lever (31/1) is resting against WOT stop (b)
NOTE: Hand-held tester should indicate 100 %.
5
Release WOT stop (38) by turning to the left and press accelerator until it makes contact
6
Lock WOT stop (38) in the position it has adopted by tuning to the right
Examining
7
Check WOT and CTP setting