E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
-
Kickdown switch (S16/6)
-
Gear recognition switch (S16/10)
-
W/S program switch (S16/10s2)
Input and output signals:
-
Datalink connector (X11/4)
Output signals:
-
Reverse/parking lock valve (Y66/1)
-
Selector lever position P/N to the engine control module (ME-SFI) (N3/10)
(only on detection of the selector lever position "P" or "N" on the transmission range recognition switch (S16/10) and at the starter interlock
contact (Y3/6s1))
In addition there is a connection via the engine compartment bus to the:
-
ME-SFI [ME] control module (N3/10)
-
Traction system control module (N47)
The solenoid valves for the modulating and shift pressure and for the gearchanges are actuated by the ETC control module (N15/3). The pressure
required is calculated from all input signals, adjusted to the torque to be transferred.
This involves the processing of the following data from other systems:
ME-SFI control module (N3/10) or CDI control module (N3/9)
-
Engine torque
-
Engine speed
-
Accelerator pedal position
-
Gear shift
-
Engine status
Traction system control module (N47)
-
Wheel speeds
-
Gear shift
-
Traction status
The following information is output to other systems:
ME-SFI control module (N3/10) or CDI control module (N3/9)
-
Kickdown switch (S16/6)
-
Engaged drive mode
Traction system control module (N47)
-
Transmission ratio
-
Speeds