E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Cruise Control Switch: Description and Operation
Variable Cruise Control Switch
NOTE:
Application:
ENGINE 112.911 #2 in MODEL 210.061/261 as of 1.3.97
ENGINE 112.921 #2 in MODEL 210.063/081/281 as of 1.3.97
ENGINE 112.941 #2 in MODEL 210.065/265/082/282 as of 1.3.97
TASK
Limiting vehicle speed to an individually set figure (from 30 km/h up to maximum speed of the particular vehicle model).
DESIGN/FUNCTION
Switchover between cruise control and variable speed limiter (VSL) is performed with the sliding part of the switch (direction 5).
ACCELERATE-SET (direction 1): increases speed limit in steps of 10 km/h.
DECELERATE-SET (direction 2): reduces speed limit in steps of 10 km/h.
RESUME-SET (direction 4): activates the speed limit last set and increases it each time by 1 km/h.
OFF position (direction 3): to switch OFF.
S40/4 Variable Cruise Control Switch
1
ACCELERATE-SET
2
DECELERATE-SET
3
OFF position
4
RESUME-SET
5
Switch over between cruise control and variable speed limiter (VSL)
6
LED (comes on when VSL active)
POSITION
Behind steering wheel.
Variable Speed Limit Display
NOTE:
Application:
ENGINE 112.911 #2 in MODEL 210.061/261 as of 1.3.97
ENGINE 112.921 #2 in MODEL 210.063/081/281 as of 1.3.97
ENGINE 112.941 #2 in MODEL 210.065/265/082/282 as of 1.197
TASK
LIM display: advises the driver that the VSL is active (LIM display comes on). Speed display: advises the driver of the speed limit which is set.
DESIGN/FUNCTION
If system is switched over to trip counter on instrument cluster, the trip counter reading is retained until the speed limit is altered by setting or
overshooting. If speed limit overshoots, the display of the speed limit begins to flash. There is a twin use with the maintenance interval display
although the VSL has a higher priority.
POSITION