E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Model 203.2
DANGER:
-
Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid.
-
Render the hydraulic system pressureless before commencing work on system. Wear protective clothing and eye protection.
1
Drain hydraulic system
NOTE: Installation: Recharge hydraulic system
CAUTION: General notes for working on vehicles with level control / ADS
2
Disconnect pressure lines (S1, P4) from spring actuator
3
Remove the exhaust system from the brackets mounted on the floorpan and attach it to a hook to prevent it from tilting
NOTE: When removing hydraulic suspension pressure accumulator on left side
4
Remove paneling in trunk on left
NOTE: When removing hydraulic suspension pressure accumulator on left side
5
Remove spare tire cover
NOTE: Remove hydraulic suspension pressure accumulator by extracting through the luggage compartment
6
Remove both rearwheelhousing liners
7
Unscrew self-locking nuts (4f) and remove hydraulic suspension pressure accumulator (4)
NOTE: Model Series 202, 208: Remove leftside hydraulic suspension pressure accumulator through the luggage compartment.
8
Remove covers for left and right-side storage compartments