E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Shifter A/T: Description and Operation
GF27.60-P-2000GA Function of Gear Shift
GF27.60-P-2000GA Function of gear shift
-
TRANSMISSION 722.6 in MODELS 163, 170, 202, 208, 210
-
with touch shift
-
TRANSMISSION 722.6 in MODELS 203 up to 23.4.04, 215, 220
On transmission 722.6 the electrohydraulic control unit converts the electric signals going out from the electronic transmission control (EGS) into
hydraulic signals. Faults occurring in the ETC control unit (N15/3) are handled by the limp-home system. The limp-home system is designed so that
the driver can reach a Service Operation even under extreme conditions.
Selector lever positions "P", "R", "N" and "D" are transmitted by the electronic selector lever module control unit (N15/5) on the Controller Area
Network bus class C (engine compartment)
(CAN-C) and in parallel to this by means of a shift rod to the range selector lever at the transmission end. By touching or holding the selector lever
towards "+" or "-" the shift range is preselected and displayed in the instrument cluster (A1) until an upshift of transmission 722.6 is possible.
Component Identification