E 320 4MATIC Wagon (210.282) V6-3.2L (112.941) (1998)
Windshield: Service and Repair
AR67.10-P-1000-11SX Cut Out Windows With Roll Out
AR67.10-P-1000-11SX Cut Out Windows With Roll Out
Component Identification
Work is shown on windshield.
1. Mask off puncture point at position (A) (arrow) from outside with suitable textile adhesive tape and punch from vehicle interior through adhesive
seam of window (18) with awl (2).
Except when removing rear window on model 216.
2. Cut cutting wire to correct length.
The length of the cutting wire should be approx. 4 times the diagonal of the window.