E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
12. Clip inner section (8) into bumper (1) (see arrows).
Vehicles with Keyless Go Code 889
13. Fasten rear bumper antenna (A2/31) on bumper with bolts (15) and aluminum rivet (14).
14. Connect electrical connector on wiring harness (13) to rear bumper antenna (A2/31).
Vehicles with Parktronic system (PTS) code 220a and/or Keyless Go, code 889
15. Fasten wiring harness (13) to bumper (1) with cable strap (16) (see enlarged detail).
16. Fasten wiring harness to bumper (1) with cable tie (arrows).
17. Fasten bracket (17, 18) to bumper (1) on left and right with aluminum rivet (14).
Ensure, that the seal washer (19) is installed on the bracket (18).
18. Glue intermediate layers (20) to bumper on left and right (1).
Intermediate layers (20) are different for the left and right side.
19. Fasten guide rails (21) to bumper (1) on left and right with plastic rivet (22).
Guide rails (21) are different for left and right side
20. Clean contact surface for paneling (23) on bumper (1).