E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
Fuel Door Release Actuator: Service and Repair
AR80.20-P-2300TA Remove/Install CL Element Fuel Filler Flap
1
Disconnect ground cable of battery
2
Remove right inner side paneling of load compartment
3
Loosen screws (1) and remove CL tank flap motor (M14/10) from side wall until electrical connector on CL tank flap motor (M14/10) is
accessible.
NOTE: Installation:
-
Feel guide duct and insert locking pin (4) into guide duct.
-
Slide CL tank flap motor (M14/10) to stop toward front and tighten screws (1).
4
Disconnect electrical connector on CL tank flap motor (M14/10)
5
Unscrew screws 82) and remove mount (3) from CL tank flap motor
-
Only when replacing tank flap CL [ZV] motor (M14/10).
NOTE: Installation: Install CL tank flap motor (M14/10) against stop in oblong holes of mount (3).
6
Install in the reverse order