E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
Hold the thrust piece (01f) when screwing in the spindle (01e) in order to prevent the rubber mount (2) from twisting.
The thrust pieces (01f, 01g) and spindle 01e) must remain on the rear axle carrier (3) for a further 2 minutes after drawing in so that the rubber
mount (2) can settle.
12
Unscrew the spindle (01e) and remove thrust pieces (01f, 01g).
13
Attach washer (1) to rubber mount (2).