E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
Camshaft Bearing: Service and Repair
AH05.20-P-2000-01AV Notes on Installing Camshaft Bearing Bridge
AH05.20-P-2000-01AV Notes on installing camshaft bearing bridge
-
except CODE (479) cylinder shutoff
Shown on engine 112
Component Identification
Pay attention to the following notes before installing the camshaft bearing bridges:
-
Lubricate the camshaft bearings.
-
Due to tolerance reasons, the camshafts must not be replaced individually.
-
If the camshaft bearing bridge is damaged, replace the cylinder head complete with the camshaft bearing bridge.
-
It not permitted to reuse the bolts M7x84; these must always be replaced.
-
Pay attention to tightening torque, slackening diagram and tightening diagram of the bolts M7x84.