E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
6
Disconnect evaporator housing
NOTE: Place to the side with electrical leads connected.
7
Unscrew bolts (4)
8
Detach right center vent air flap actuator motor(M2/13)
9
Install in the reverse order
10
Synchronize the stepper motors.
AR83.10-P-2019T Remove/Install Actuator For Center Outlet Flap
AR83.10-P-2019T Remove/Install Actuator For Center Outlet Flap
- without CODE (581b) Convenience automatic air conditioning
1
Remove evaporator housing
2
Remove bolts (1)
3
Remove center outlet flap actuator motor (2/22)
4
Disconnect electric connector (2)
5
Install in the reverse order
6
Synchronize the stepper motors.
AH83.10-P-0001-01T Information on Installing Actuator Motors
AH83.10-P-0001-01T Information On Installing Actuator Motors
Before assembling the actuator motors, check the condition of the adjustment mechanism. If damaged, remove the corresponding part from the
kinematics parts kit.
Parts needed for the basic automatic air conditioning: