E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
Fuse Block: Service and Repair
AR54.15-P-1330T Remove/Install Front Prefuse Box
AR54.15-P-1330T Remove/Install Front Prefuse Box
1
Disconnect ground cable of battery
2.1 Remove rear engine compartment paneling
2.2 Remove bottom part of rear noise encapsulation
3
Remove dust shield (1)
4
Clip on protective cap (2) (arrow)
5
Unscrew nut (3) and detach electrical line (4)
CAUTION: Replace self-locking nuts (3).
-
Nut, Cable connection to front prefuse box M8: 14 N.m.
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified
by the vehicle manufacturer.
6
Lower vehicle with lifting platform
7
Fold back floor covering (5) in front passenger footwell
8
Remove sound-deadening material (6) upwards off the footrest (8)
9
Unscrew nuts (7)