E 320 4MATIC Wagon (211.282) V6-3.2L (112.954) (2003)
Modification Notes
Special Tools
Component Identification
1
Clamp rear axle shaft flange (1) in vise.
2
Fit thrust piece (04) on rear axle shaft flange (1).
Component Identification
3
Screw clamping pliers (02) onto puller (01) and tighten.
4
Fit puller (01) on bearing inner race (2) and clamp securely.
5
Screw in pressure screw (03) and pull bearing inner race (2) off rear axle shaft flange (1) using puller (01).