E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-2114001.png)
PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Limp-Home Mode with DTC 2082-008
Date: April 11, 2008
Order No.: S-B-14.40/25
Supercedes:
Group: 14
SUBJECT:
Model 164.122, Up to VIN A277429
Model 211.022, Up to VIN B150432
Model 251.122, Up to VIN A060265
Engine Changes to Limp-Home Mode with DTC 2082-008
If you receive customer reports in the above model vehicles of the engine going into limp-home mode with Diagnostic Trouble Code (DTC) 2082-008
(Check component B28/8 (Pressure differential sensor (DPF)) plausibility error due to malfunctioning hose lines), this may be caused by the software
parameters in the CDI engine control unit. To remedy this issue, program the CDI engine control unit with the latest CDI software release (Software
Availability: Engine 642 as of DVD 05/2007 and Later).
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
April 11, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.
