E 320 Wagon (210.265) V6-3.2L (112.941) (1998)
Injection system control module (N3), depending on version: IFI control module (N3/7), DFI control module (N3/8), engine control module
(HFM-SFI) (N3/4), CDI control module (N3/9), engine control module (ME-SFI) (N3/10) and traction Systems control module (N47)
NOTE: The CFI control module (N3) and traction system control module (N47) are mounted on one bracket (5) and must always be removed together.
1
Release connector (3) on CFI control module (N3).
2
Pivot connector (3) to side until the multi point male connector is released from the CFI control module (N3).
3
Pull sliding lock (located below lead entrance) on both connectors (4) on tradition systems control module (N47) out to stop and remove
connectors.
4
Unscrew screw (7) and pull mount (5) together with the two control modules up and out of control module box guides.
Relay module (K40)
1
Remove connectors (8) from relay module (K40).
2
Press clamping spring (9) to side and remove relay module from control module box.