E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Cargo Cover: Customer Interest
Interior - Load Compartment Cover Sags On One Side
Date: May 23, 2006
Order No.: P-B-68.50/50
Supersedes:
Group: 68
SUBJECT:
Model 211.256/265/282/283/287
Load Compartment Cover Sags Noticeably More on One Side
If you receive customer reports in the above model vehicles that the load compartment cover sags noticeably more on one side compared to the opposite
side, this can occur over time due to tolerances and operating conditions. Measure the sag as shown (Figure 1) using a straight edge and a ruler or tape
measure. The roller blind should only be replaced if the sag on one side exceeds 40 mm as measured from the straight edge.
Note:
In case of warranty, the sag measurement and the affected side must be entered on the warranty part return tag and in the comment box on the
warranty claim.
Parts Information