E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
9.
Remove SBC ground wires (arrows, Figure 9) from SBC harness connector (A):
^
Unpin ground wire connectors (position 37 and 44) using cable release tool and remove from SBC connector housing (A) (special tool nos.: W 000
589 13 99 30 and W 220 589 01 99 50).
^
Discard old ground wiring harness; it is no longer needed.
10.
Insert the new ground wire harness (arrows Figure 9) into the SBC connector housing (A):
^
Insert longer ground wire into position 44.
^
Insert shorter ground wire into position 37.
Note:
Ensure ground wire connectors are properly locked into place.