mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF27.10-P-0001-04P Automatic Transmission (AT) Location of Components, Floor Shift|Page 11284 > < GF27.10-P-0001-04P Automatic Transmission (AT) Location of Components, Floor Shift|Page 11282
Page 3
background image

P

Park lock and start position.

R Reverse gear.
N Neutral and start position (power transmission does not take place, the vehicle is freely moveable).
D Drive mode, all 7 forward gears are available.
+

Touch: Upshift by one shift range each time. Press and hold down: Change from the current shift range direct to "D"

-

Touch: Shift down one shift range. The selected gear is only engaged at the permitted rotational speed. Press and hold down: The transmission is
shifted into a gear from which the vehicle can be easily accelerated or decelerated.

With a finite shift range, upshifting takes place close to the engine limit speed.

Transmission mode switch (S16/6)

Sport program "S":
^

Starting off in 1st gear for all driving situations.

Comfort program "C":
^

Starting off always in 2nd gear (except 1st gear shift range).

^

The gears are not driven to maximum revs.

If kickdown is actuated the gears are shifted up and down as for the sport program "S".

GF27.10-P-0001-05NTL Automatic Transmission (AT), Selector Lever Positions

GF27.10-P-0001-05NTL Automatic transmission (AT), selector lever positions

- TRANSMISSION 722.9
- with CODE (428) Steering wheel shift buttons

6 different functions can be selected using the selector lever and 3 different transmission modes can be selected using the transmission mode switch
(S16/5).

Selector lever positions:

^

P Park lock and start position

^

R Reverse gear

^

N Neutral and start position (no power transmission, vehicle can move freely)

^

D Drive (all 7 forward gears are available)

^

+ Touch: Upshift by one gear per touch In transmission modes "C" and "S" the shift range is extended at the same time. Press and hold: Direct
shift to drive position "D"

The shift range is displayed in the instrument cluster (A1). If the shift range is restricted, upshifts occur close to the engine cutoff speed.

^

- Touch: Downshift by one gear per touch

In transmission modes "C" and "S" the shift range is restricted at the same time.

Press and hold: Transmission is shifted into a shift range from which the vehicle can be easily accelerated or decelerated.

Transmission mode switch (S16/6)

The following transmission modes can be selected:
^

S Sport mode
-

Start-off in 1st gear for all driving situations

^

C Comfort mode
-

Start-off in 2nd gear except in 1st gear range

Gear changes are performed at lower engine speeds.

If kickdown is actuated, the gears are shifted up and down as for transmission mode "S".

^

M Manual shift program
-

direct gear selection using selector lever or left steering wheel gear shifter (S110/2) and right steering wheel gear shifter (S111/2) (up to
31.5.06) or steering wheel gear shifter MINUS (S110/1) and steering wheel gear shifter PLUS (S111/1) (as of 1.6.06)

GF27.10-P-0001-05PMA Automatic Transmission (AT), Selector Lever Positions

GF27.10-P-0001-05PMA Automatic transmission (AT), selector lever positions

- TRANSMISSION 722.6
- with CODE (428) Steering wheel shift buttons

GF27.10-P-0001-04P Automatic Transmission (AT) Location of Components, Floor Shift|Page 11284 > < GF27.10-P-0001-04P Automatic Transmission (AT) Location of Components, Floor Shift|Page 11282