E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Component Identification
3
Support rear axle center assembly with transmission jack and transmission platform.
4
Detach bolts (51a) and nuts (51c) from transverse bridge (51).
5
Remove shims (51b).
6
Install the appropriate shims (51b) according to the type of correction.
Ensure that the shims (51b) are correctly positioned, see diagram. All the shims installed must have the same eccentric hole arrangement.
Shows model 211
7
Install bolts (51a) and nuts (51c).
8
Remove transmission jack and transmission platform.
Vehicles with AIRMATIC DC
9.1
Attach additional volume reservoir on right (60a) and additional volume reservoir on left (60b).
10
Install exhaust shielding plate (106a) and exhaust shielding plate (106b).
AR41.10-P-0200-03T Press In Guide Sleeve
AR41.10-P-0200-03T Press in guide sleeve