E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Drive/Propeller Shaft: Testing and Inspection
AP41.10-P-4152Z Propeller Shaft - Checking Couplings For Damage
Propeller Shaft - Checking Flexible Couplings For Damage And Deformation
DANGER:
-
Risk of fatal accident if the vehicle slips off the lifting platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Lift vehicle with lifting platform
2
Check flexible couplings and vibration damper for wear, damage and deformation
NOTE: Visual inspection, if necessary: Replace flexible coupling or vibration damper as a separate repair order.
3
Check spacers of flexible coupling in vicinity of fitted sleeves for cracks and permanent deformation
NOTE:
-
Vehicles with flexible couplings (absorbing acceleration/deceleration) mounted at the transmission end.
-
Visual inspection, if necessary: Replace flexible coupling as a separate repair order.
4
Check spacers of vibration damper for crack
NOTE: Visual inspection, if necessary: Replace vibration damper as a separate repair order.
AR41.10-P-0086T Measure Propeller Shaft Alignment With Electronic Angle Meter
AR41.10-P-0086T Measure Propeller Shaft Alignment With Electronic Angle Meter