E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Headlamp Motor: All Technical Service Bulletins
Campaign - Headlamp Range Adjustment Nonfunctional
Date: May 21, 2008
Order No.: P-B-82.10/612a
Supersedes: P-B-82.10/612 dated Feb. 12, 2008
Group: 82
Revision History
Revision
Date
Purpose
a
5/21/08
Applicable Fault Codes Revised
-
2/12/08
Initial issue
SUBJECT:
Model 211.026/056/065/070/072/076/077/082/083/087/090/256/265/
276/277/282/283/287
Equipped with Option Code 615 (Bi-Xenon)
Headlamp Range Adjustment Nonfunctional with DTC Codes 9010, 9011, 9012, 9013 or 9024 (up to VIN B111276) Parking Light LED Nonfunctional
(up to VIN B100720)
If you receive customer reports in the above model vehicles equipped with bi-xenon headlamps of either of the below conditions, please replace the
bi-xenon headlamp to resolve.
1.
Headlamp range adjustment nonfunctional and DTC Codes 9010, 9011, 9012, 9013 or 9024 (up to VIN B111276). This may be caused by the
headlamp range adjustment motor may be sticking in the rear reference position due to excessive force in the axial direction.
2.
Parking light LED nonfunctional (up to VIN B100720). This may be caused by the solder bridge or broken internal connection to the headlamp
unit.
Note:
Refer to EPC Group 82 for applicable part number.
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on February 12, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.