E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Component Identification
1
Place steering knuckle under press.
2
Press the front axle shaft flange (9) out of the steering knuckle using the thrust piece (09c) and extraction and insertion tool
Inserting
Component Identification
3
Draw the front axle shaft flange (9) into the double-row angular ball bearing (9n) using the extraction and insertion tool.
Ensure that when drawing in the pressure plate (05c) makes proper contact with the double-row angular ball bearing.
AR33.20-P-0315-02I Remove/Install Circlip
AR33.20-P-0315-02I Remove/install circlip
Commercially Available Tools
Component Identification