E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Seals and Gaskets: Service and Repair
AR28.10-P-1000-21P Remove/Install Radial Sealing Rings on Front Section of Transmission Housing
Removing and installing radial sealing rings on front section of transmission housing
Removing
1. Use a suitable tool to drive radial sealing ring (11) out of front axle output flange and radial sealing ring (26) out of rear axle drive output shaft.
Installing
2. Coat lip of new radial sealing ring of front axle output flange with Automatic Transmission Fluid (ATF).
3. Press in radial sealing ring of front axle output flange using drift (011).