E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
/v6-3.5l_(272.972)/Page-2596010.png)
2
Use drift (011) to press radial sealing ring into the transmission housing front section (16a).
Shown on model 203
AR28.10-P-4150-03P Remove Radial Shaft Seal at Rear Axle Output Flange
AR28.10-P-4150-03P Remove radial shaft seal at rear axle output flange
Component Identification
1
Use a suitable screwdriver to press the radial sealing ring (15b) out of the transmission cover (15).
Shown on model 203
AR28.10-P-4150-04P Install Radial Shaft Seal at Rear Axle Output Flange
AR28.10-P-4150-04P Install radial shaft seal at rear axle output flange
Automatic transmission fluids (ATF, Specification 236.10)
Special Tools
Component Identification
1
Coat lip of new radial sealing ring with automatic transmission fluid (ATF).
2
Press new radial sealing ring into transmission cover (15) using drift (033).
Shown on model 203
