E 350 BLUETEC (212.024) V6-3.0L DSL Turbo (642.850) (2011)
/v6-3.0l_dsl_turbo_(642.850)/Page-70002.png)
^ Remove engine belt from vibration damper (it's not necessary to completely remove belt from engine).
^ 4Matic only: It's not necessary to completely remove starter from engine to install retaining lock (special tool). Unbolt starter from engine and unclip
(metal) starter harness clip from mount, then move starter to one side.
The following repairs may not be claimed under this campaign:
^ Check/replace engine belt.
^ Check/replace engine drive plate (flywheel).
SPECIAL TOOLS
PRIMARY PARTS INFORMATION
Note:
^ Please be aware that only the part number(s) referenced in the Campaign Bulletin is approved for use to repair the vehicle. Repairs performed using
any other part(s) will not have been performed in accordance with the campaign. Accordingly, warranty claims submitted with reference to an
improper part number(s) will be denied.
^ The following allowable labor operation should be used when submitting a warranty claim for this repair:
