E 350 BLUETEC (212.024) V6-3.0L DSL Turbo (642.850) (2011)
^ Connect fuel lines (L) to filter fuel (M) before tightening fuel filter bracket screw (to allow proper positioning of fuel lines).
^ Replace fuel line CLICK clamps (K), do not reuse old clamps.
^ Use only proper CLICK clamp pliers (refer below) to fasten click clamps (K) to fuel lines (L) or clamps (K) may be damaged when fastening.
Warning!
^ Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting
procedure or when working near the engine as it is running.
^ Start engine and check fuel system for leaks. Secure vehicle to prevent it from moving by it self. Wear closed and snug-fitting work clothes. Do not
touch hot or rotating parts. Refer to WIS: AS00.00-Z-0005-01A.
Locally Sourced Tool
Primary Parts Information
Note:
^ Please be aware that only the part number(s) referenced in the Campaign Bulletin is approved for use to repair the vehicle. Repairs performed using
any other part(s) will not have been performed in accordance with the campaign. Accordingly, warranty claims submitted with reference to an
improper part number(s) will be denied.
^ The following allowable labor operation should be used when submitting a warranty claim for this repair:
WARRANTY INFORMATION
NOTE REGARDING CUSTOMER REIMBURSEMENT
Reimbursement to customers for repairs performed prior to this recall:
If the customer already paid to have this recall campaign condition repaired and provides adequate documentation to support their claim of a
non-warranty repair of this item, they may be eligible to receive reimbursement.
