E 350 Sedan (212.056) V6-3.5L (272.980) (2010)
/v6-3.5l_(272.980)/Page-2594022.png)
Use only paint and paint system approved by Daimler AG.
1. Mask insides of rear spoiler (1).
Ensure that paint or paint fog does not get onto the insides of the rear spoiler (1) or adhesive strips.
2. Treat rear spoiler (1) according to Daimler AG painting guidelines and paint outsides of rear spoiler (1) to match vehicle color.
The outsides of the rear spoiler (1) are already primed light gray.
3. Remove masking material from rear spoiler (1) after paint is cured.
AZ88.50-P-0005-02EW Install Spoiler on Trunk Lid
AZ88.50-P-0005-02EW Install Spoiler On Trunk Lid
- except CODE (772) AMG styling package - front spoiler, side skirts, and rear apron
Repair Materials
Helper required to assemble rear spoiler (1).
1. Install rear spoiler (1) on trunk lid, center and mark position with adhesive tape (3).
Ensure that the distance to the outside sides is the same on left and right.
2. Cut adhesive tape (3) with suitable knife in gap between rear spoiler (1) and trunk lid.
Do not damage paint layer on trunk lid or rear spoiler (1).
3. Remove rear spoiler (1) and clean trunk lid in bonding area.
The area on the trunk lid to be glued must be free of dust and grease.
