E 500 (211.070) V8-5.0L (113.967) (2004)
Voice Activation Module: Service and Repair
AR82.70-P-0003T Remove/Install Voice Control System Control Unit
- with CODE (813) Voice control system (VCS [SBS])
1
Disconnect ground cable of battery
2
Remove damping material (1)
3
Remove carrier plate covering (2)
4
Separate electrical plug connection (3)
5
Unclip wiring harness (4) from carrier plate (5) and place to one side until screw (6) is accessible
6
Unscrew screw (6)
7
Open tie straps (7) and remove voice control system control module (A35/11) from carrier plate (5)
NOTE: Installation: Replace tie straps (7)
8
Install in the reverse order