E 500 (211.070) V8-5.0L (113.967) (2004)
^
Position bracket (A) on SBC hydraulic unit, reinstall self tapping screw (arrow) and torque to 7 Nm.
21.
Install clamp-on mounting bracket (Figure 22) if necessary due to broken self tapping screw:
Note:
Ensure sheathing (arrow) on mounting bracket clamp is positioned as shown in Figure 22.
^
Position mounting bracket (B) onto SBC hydraulic unit (A) as shown in Figure 23.
Note:
^
Ensure mounting bracket (B, Figure 23) is flush with SBC hydraulic unit (A).