E 500 (211.070) V8-5.0L (113.967) (2004)
Component Identification
1. Prepare parking assist wiring harness (25) as shown in the diagram and route in the vehicle.
2. Connect parking assist wiring harness (25) to plug position 17 (arrow) in rear SAM/SRB (N10/2) in left side of trunk.
3. Connect parking assist wiring harness (25) to parking assist connector on FFS/rear bumper (X35/28).
4. Route parking assist wiring harness (25) through the left-hand cable duct in the rear wall to the overhead control panel/FFS connector (X25/8) and
connect warning element wiring harness (22).
5. Fasten wiring harnesses with cable straps.