E 500 4MATIC Wagon (211.283) V8-5.0L (113.969) (2004)
Rear Entertainment Unit
Parts Ordering Notes
AZ82.61-P-0001-04MM Performing Start-Up and Function Test
AZ82.61-P-0001-04MM Performing Start-up And Function Test
- with CODE (860) TV tuner
The battery ground lead must be connected for initial startup.
1
Switch on ignition.
2
On the COMAND (1) system in the vehicle, start the TV function and select the AV1/ AUX1 program.
After the AV1/AUX1 program is selected, the COMAND (1) system display must either show a black screen or a black screen with the message
"No signal" on it. If the screen is blue, then check whether the black screen or a black screen with the message "No signal" is displayed when the
AV2/AUX2 program is selected.
If a black screen or a black screen with the message "No signal" is displayed for the AV2/ AUX2 program, this means that the connectors for the
digital TV tuner are connected to the AV2/AUX2 input of the TV tuner and must be connected to the AV1/AUX1 input of the TV tuner instead.
To operate the functions of the COMAND (1), refer to the system operating instructions.
3
Press teach-in button (7) on digital TV tuner (2).