E 550 (211.072) V8-5.5L (273.960) (2007)
Only vehicles with Keyless-Go
11. Detach Keyless-Go wiring harness from Keyless-Go control unit and unpin line from coupling. Pass line through rubber grommet on wiring
harness (5). Reattach sensor wiring harness (5), pin into coupling and connect to Keyless-Go control unit.
12. Remove connector of vehicle wiring harness at left taillamp.
13. Unpin brown line from vehicle wiring harness at left taillamp and pin into chamber 2 of the supplied coupling (8).
14. Unpin yellow line from vehicle wiring harness from connector at left taillamp and pin into chamber 1 of the supplied coupling (8).
15. Connect coupling (8) to connector (9) of supply wiring harness (1).
16. Pin brown line (6) into vacant chamber 3 of connector of vehicle wiring harness.
17. Pin yellow/gray line (7) into vacant chamber 6 of connector of vehicle wiring harness.
18. Reconnect connector to taillamp.
19. Connect connector (15) of supply wiring harness (1) to coupling (13) of sensors wiring harness (5).
Do not damage or crush the wiring harness when routing and fixing.
AZ54.65-P-0001-08M Perform Version Coding Subsequently
AZ54.65-P-0001-08M Perform Version Coding Subsequently