mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Tire Pressure Monitor Antenna > < Electrical - Electrostatic Discharge Damage Prevention|Page 16291
Page 1
background image

Global Positioning System Antenna: Service and Repair

AR82.85-P-0002T Remove/Install GPS Antenna

- with CODE (521) MB Audio 50 radio USA (without navigation)
- with CODE (525) MB Audio 50 APS radio
- with CODE (526) COMAND (without navigation)
- with CODE (527) COMAND APS (with navigation)
- with CODE (530) COMAND APS USA (with navigation system)

1

Remove rear spoiler     

2

Remove adhesive felt (1) and disconnect antenna line electrical connector (2) underneath     

3

Remove grommet (3) from rear-end door (4)

NOTE:  Installation: Use sliding compound.

4

Lead antenna line (2) out through rear-end door (4)     

5

Detach GPS antenna (A2/23) from rear-end door (4) using mounting wedge (4) and remove

NOTE
-

Always replace GPS antenna (A2/23)

-

Installation: Clean and de-grease 

-

Installation location on rear-end door (4)

See "Special Tools" given below.

6

Install in the reverse order

Special Tools

Mounting Wedge, P/N # 110 589 03 59 00

Tire Pressure Monitor Antenna > < Electrical - Electrostatic Discharge Damage Prevention|Page 16291