mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 17503 > < Procedures|Page 17501
Page 6
background image

13. Insert center impact absorber (30) removed from standard bumper into front bumper paneling (1) and arrest.

The center impact absorber (30) should arrest properly in the center basic carrier (31).

13. Install spring nuts (6) for mounting left and right air inlet grate (6 each).
14. Install spring nuts (13) for mounting left and right front fog lamps (6 each).

15. Insert left front fog lamp (E5/1) and right front fog lamp (E5/2) into front bumper paneling (1) and install with three 4.8 x 19 combination bolts

(15) each.

On models 211.077/ 277 each of the front fog lamps is installed with 4 combination bolts.

16. Insert center bottom reinforcement (5) into front bumper paneling (1) and fasten with hot melt adhesive.

On models 211.077/ 277 the left and right reinforcements are also inserted into the front bumper paneling (1) and fastened with hot melt adhesive.

Procedures|Page 17503 > < Procedures|Page 17501